Hapro

Operating display for the Hapro Innergize HP8580

This part is used for Hapro model Innergize HP8565 and for Philips model HB935

This part is used for Hapro models: Pearl | Opal | Ruby

This part is used for Hapro models: Topaz | Onyx | Onyx Pro-line | Lumina A | Lumina C | Lumina E | Luxura 530 | Model L...

This part is used for Hapro models: Topaz | Onyx | Onyx Pro-line | Lumina A | Lumina C | Lumina E | Luxura 530 | Model Luxura 630 | Luxura 730 | Luxura Delta 500 | Lumina<2000 | Luxura 40 | Luxura 520

Inepro coin machine with coin acceptor for 1 Euro coins. Can be used for various applications and is fully programmable ...

Inepro coin machine with coin acceptor for 1 Euro coins. Can be used for various applications and is fully programmable in terms of main time and lead time.

Main board for all Luxura V-series sunbeds such as the V5, V6 and V8

This part is used for Hapro models: Pearl | Opal | Ruby | Topaz | Jade and for the Sunlounge Salsa (Alisun / Eurosolar)

This NTC 10 (Thermistor) replaces the smaller NTC 22 at Philips models HB810 to HB823 and the Philips/Hapro HP8540. The...

This NTC 10 (Thermistor) replaces the smaller NTC 22 at Philips models HB810 to HB823 and the Philips/Hapro HP8540. The NTC 10 is more robust than the NTC 22 and therefore lasts longer.

This part is used for Hapro models: Jade | Onyx | Onyx Pro-line | Lumina A | Lumina C | Lumina<2000 | Luxura X3

This part is used for Hapro models: Model Luxura 630 | Luxura 730 | Luxura 620 | Luxura 720

This part is used for Hapro models: Lumina C | Lumina E | Lumina<2000

This part is used for Hapro models: Sapphire | Jade | Onyx | Synergy and a lot of older types with 850N.

Original gas spring from Hapro colour: Black Strength: 550N Please note, different strengths are often needed for foot a...

Original gas spring from Hapro colour: Black Strength: 550N Please note, different strengths are often needed for foot and headboard! Length center to center mounting eyes: 470mm

Original from Hapro Brand: Stabilus For Hapro models Lumina A and Luxura X3 Pay attention! Different springs are often u...

Original from Hapro Brand: Stabilus For Hapro models Lumina A and Luxura X3 Pay attention! Different springs are often used for the head and foot end! Other strengths available: 550N - 580N - 650N

Mounting materials Luxura V5 and V7

This part is used for Hapro models: Jade | Onyx | Onyx Pro-line | Lumina A | Lumina C | Lumina<2000 | Luxura X3

SunHorse electronic ballast for two 100W lamps. This part is used for Hapro models: Luxura X3 II | Pro-line V | Seecret ...

SunHorse electronic ballast for two 100W lamps. This part is used for Hapro models: Luxura X3 II | Pro-line V | Seecret 300

For all tanning tubes of 80 an 85 Watt

Main circuit board for Hapro Lumina type C and E. Also used in the first generation Luxura X5 and X7