Collection

Electronic ballast from manufacturer Vossloh-Schwabe for fluorescent lamps with a power of 140 or 160W. Used in tanning beds from Ergoline and Hapro, among others.

Facial tanner with powerful 400 Watt HPA lamp. Has a large tanning surface of 40 x 60 cm.

UV-code: 100-O-31/6,8 The lamp with the most natural tanning results and the longest service life

This part is used for Hapro models: Summer Glow HB 175. Also fits all other sunbed and sunbed timers.

595mm replacement lamp for infrared cabins with full spectrum 500W infrared radiators. Also available in 300W

Also for Philips HB558, HB566, HB567, HB568 and HB585 Unique article number Stabilus: 2672NA

HPA 400W lamp with R7s fitting and a length of 104mm

For all models from HB810 to HB977, the HP8540. Also used for some full-size tanning beds from Philips and Hapro with the following names: Topaz, HB558 through HB568 and the HB585

Replacement gas spring for the commonly used Alpha Sun 0330N gas spring from Stabilus. Both for the versions mounted on a sunbed and the version of the sunsky on a stand. The original Stabilus article was: 716448 or 9543HP

UV-code: 100-O-48/9,2 190cm 'tubotanner' lamp for example Hapro Onyx, Alisun / Euro Solar Allura and all other sunbeds with 190cm lamps with 100 to 120 watts

Original gas spring for the Philips HB578, HB579, HB580 and HB581 Sunstudio sunbeds. We also have the cheaper alternative!

This part is used for Hapro models: Topaz And for Philips Models: HB557, HB558, HB566, HB567, HB568 en HB585 Measurements: 1808 x 638 x 3mm

Main board for all Luxura V-series sunbeds such as the V5, V6 and V8

UV-code: 40-R-25/2,5. This 40W UV-lamp has a build-in reflector. Article number iSOLde: 962835040.

Infrared heating element of 500 Watt for Alpha infrared cabins such as Chaleur and Infrawave. Length from mounting plate 60cm

Set with control panel and switch box for older Jokey and Bruynzeel infrared cabins

Philips S12 starter for electromagnetic ballasts. Was often used for tanning beds with fluorescent lamps from 80 to 160W. Other variants are currently available for lamps below 115W and above 140W.

Electronic ballast from manufacturer Vossloh-Schwabe for fluorescent lamps with a power of 100 or 120W. Used in tanning beds from Ergoline and Hapro, among others.

This gas strut is used for Hapro models: Onyx 26, Onyx 26/1 and Onyx 26/5. Strength: 270N

Inepro coin machine with coin acceptor for 1 Euro coins. Can be used for various applications and is fully programmable in terms of main time and lead time.